Juno PLASTE FIBER flexible putty
18,51€ - 92,57€
- Flexible putty reinforced with fiberglass.
- Sealing and reinforcing of fissures and dynamic cracks on plaster, concrete, etc. It does not crack or fissure, great adhesion and permanent elasticity. Paintable except with 2 / C solvent-based products.
- Theoretical yield: 1,2 kg / m2 per 1 mm of thickness.
- Recommended thickness per layer: 0,3 to 3 mm.
Features
Description
Flexible putty for use reinforced with fiberglass to cover cracks with movement. Permanent elasticity. Resistant to aging. It does not crack or fissure. Great adherence. It can be applied both in a thin layer and in a thick layer.
Use
Exterior and interior surfaces (concrete, cement, plaster, plastic paints, wood, ...) Renovation, repair and remodeling of cornices, sculptures, pergolas, etc. Sealing and arming of suras and dynamic cracks. Plastering of sweaty facades.
Application
The support must be healthy, clean and free of dust and humidity. In highly absorbent substrates, it may be necessary to apply a previous primer to regulate the absorption. Use a spatula whose width is slightly greater than the size of the crack, scuff, hole or cavity to be filled. Once the cavity has been filled, it is advisable to perform the smoothing operation vertically, from the bottom up, placing material and then removing the excess. Splices must be made in the reverse vertical direction, from top to bottom. To leave the surface perfectly smooth, make sure that the plaste is completely dry (see drying times indicated on the package), sand the area and apply a second coat horizontally, making the joints in the opposite horizontal direction. Sand surface to remove excess material. Respect the drying times
PLASTE FIBRA Technical Data Sheet
PLASTE FIBER Safety Data Sheet
Attributes
| Weight : | 1,5 kg |
|---|---|
| Volume | 4 liters, 750 ml |
| Use Paint | Exteriors, Interiors |
| Color | Grayish |
Opinions (0)
Be the first to rate "Juno PLASTE FIBRA flexible putty"
Related products
Reviews
Not yet reviewed