IMPRIMAX 2 / C epoxy primer
Silane-modified epoxy-polyamide consolidating primer to give it an excellent anchoring on non-porous surfaces.
- 1/4/15 L
Recommended as an interior anchor coat where a 2-component solvent-based epoxy finish is required. Recommended to promote anchoring on concrete surfaces, tiles, stoneware, etc.
Stir the contents of the container until complete homogenization. Apply on consistent, clean surfaces, free of efflorescence (saltpeter) and molds. It is not advisable to apply the product on damp surfaces or excessively heated by the sun. Dilute or not the product depending on the porosity and state of the support.
|Viscosity||Minimum 10 ″ S / FR1002|
|Density||0,96 ± 0,05 gr / cc S / FR1001|
|drying||To touch: 4-6 hours|
|Minimal repainting||Minimum 8 hours at 20 ° C|
|Maximum repainting||48 hours at 20 ° C|
|Thinner||Do not dilute|
|Performance||17,5 m² / l (20 microns dry)|
|Solids by volume of the mixture||37% ± 2% Theoretical.|
|Flashpoint||Flammable 27 ºC|
|Mix A / B by weight||2:1|
|Mix A / B by volume||2:1|
|Induction time of mixing||15 min|
|VOC content||<600 g / l|
Not yet reviewed