17,00€
Kitchen scissors from the Total range
53,28€
- Saw with 34 tungsten carbide teeth.
- Blade length: 70 cm.
- Varnished beech wood handle.
2,16€ - 2,89€
- Cutter with plastic handle with ergonomic and non-slip design and metal knife guides.
- 5mm SK9 steel blade. fragmentable into 8 usable cutting edges.
- Steel knife holder, with push button forwards or backwards for the knives, and knife extraction button.
- Easy to use cutter and blades with high level of use
0,44€ - 0,56€
- Cutter with plastic handle with ergonomic and non-slip design and knife holder guide.
- 5mm SK9 steel blade. fragmentable into 8 usable cutting edges.
- Steel knife holder, with push button forwards or backwards for the knives, and knife extraction button.
- Easy to use cutter and blades with high level of use
1,64€ - 2,13€
- Spatula with flexible blade in carbon steel, preventing oxidation. Conically ground to flex the tip.
- The body of the handle is made of plastic to improve grip and application of force.
- The putty knife can be used to lift paint, glue, plaster, sealants and dirt from surfaces and prepare for subsequent painting.
- Also to lift wallpaper and prepare for new applications. Useful for creating a smooth surface in preparation for painting.
1.923,90€
- Panel for exhibition of tools.
- Composed of metallic rear stringers that are embedded with the 2000 mm panel.
- The panel is perforated to place hooks for hanging tools.
- It has a lower drawer for lockable tools and keys.
336,43€
- Panel for exhibition of tools.
- Composed of metallic rear stringers that are embedded with the 2000 mm panel.
- The panel is perforated to place hooks for hanging tools.
- It has a lower drawer for lockable tools and keys.
1,59€ - 2,25€
- Flexometer composed of a cylindrical box for winding the tape, and metal tape measure. Plastic box.
- Steel tape measure, covered with nylon, certified precision class II. Tab to facilitate anchoring.
- Locking brake. Metal clip on the back. Loop for hanging.
- Very suitable meter for DIY, housework, etc.
3,27€ - 4,02€
- Metal blade chisel made of Chrome Vanadium Steel, heat treated which gives it different hardness on the cutting edge, which guarantees quality and robustness.
- The blade is treated to give it more hardness in the cutting edges, and less hardness in the area of the handle to avoid fracture when striking.
- The handle is ergonomic bi-material allowing a secure and firm grip. The handle has a reinforcement at the tip to hit, which makes the transmission of the hit effective.
- The surface of the blade is rectified, for greater precision and resistance.
3,58€
- Aluminum tubular lantern, 9 LED spotlight with 36 Lumen maximum intensity and 3 AAA batteries.
- The spotlight has an intense beam type LED, with a brightness of 36 lumen
- This spotlight is of LED technology (diode), with a much longer useful life, with a very precise directional flow, reducing light pollution. This allows for high intensity and low consumption, therefore longer battery life.
- The bulb has a switch with 2 options.
- Saw blade made of alloy steel with serrated cutting edge.
- Pack of 12 units.
- Adjustable to HR saw arch.
- It can be used to cut metal, wood, plastic.
5,48€ - 8,50€
- Saw with a blade made of carbon steel with standard teeth, two cutting surfaces on each tooth, sawn for and against.
- Double tempered blade.
- Reinforced and ergonomic bi-material handle made of hard plastic and non-slip rubber.
- Difficult blade break or jam.
0,23€ - 2,10€
- Hexagonal Allen wrench at 90 degree angle made of Chrome Vanadium Steel, hardened by heat treatment.
- Chrome-plated finish to prevent oxidation, extend the life of the wrench and not damage the nut.
- Manufactured following the DIN2936 standard.
- Normal length..
1,64€ - 4,80€
- Extra long allen key for use on hex head screws.
- Wrench with ergonomic plastic handle with two Allen points.
- Made of Chrome-Vanadium Steel, which gives it a long life.
- Heat treated steel, which gives it toughness and the ability to apply great force on the screw.
4,50€ - 5,93€
- Universal pliers ideal for cutting and handling jobs.
- The tip area has fine teeth to make fasteners without damaging the piece, the intermediate area is curved with a special thick teeth to tie tubes and round elements and the cutting area has edges to cut hard and semi-hard materials.
- This universal pliers has great resistance to wear as it is made of Chrome Vanadium Steel.
- The body of the plier is heat treated for added strength and the cutting edges are induction hardened to give the plier greater cutting capacity and reduce wear.
Agricultural