Glossy AQUEOUS finish varnish
Water-based polyurethane varnish, odorless. Formulated based on one-component aliphatic polyurethane resins that provides a non-yellowing film. Indoor use. Cleanliness and dilution with water. Certified by the EPD-DAP (Environmental Product Declaration): enables a sustainable building according to LEED and BREEAM standards.
Preparation
The wood must be clean, dry, grease-free and sanded. Its moisture content should not exceed 15%. It can be applied over old varnishes if they are in good condition, but it is advisable to remove them completely to achieve the best results. In new woods it is recommended to impregnate them previously with AQUEOUS Fund diluted to 10-20%, well stretched and avoiding sags.
Use
Recommended for all types of parquet and wood surfaces for its comfortable application without odor, fast drying, resistance to abrasion and easy cleaning. The preparation with AQUEOUS Fund (82.414) is recommended.
Application
Brush or roller. Sand gently after at least 3 hours. of the application of the primer and finish with 2/3 coats of AQUEOUS GLOSSY varnish. In light woods, especially oak, it must be applied well stretched avoiding sags and high varnish thicknesses since intense colorations can occur in these areas. Highly resinous woods must be previously cleaned with UNIVERSAL Solvent (D-45). The already varnished parquet can be walked on after 12 hours. Cleaning with water or detergent can be done after 10 days. Do not lay the rugs for a week. The passage of the vacuum cleaner and that of a damp cloth keep the varnish in perfect condition. Clean stains with a neutral cleaner. Do not use strong solvents or acid or alkaline products.
Downloads
AQUEOUS VARNISH Technical Sheet
Glossy Aqueous Varnish Safety Data Sheet
Reviews
Not yet reviewed