Construction pump Ayerbe AY-80
This motor pump construction for special liquids Ayerbe model AY-80 HKTH It is mainly used for residual and/or abrasive loaded water, especially for emptying trenches and septic tanks. uses a motor HONDA GX-160 and a bomb ALUM KTH-80 which was built in anticorrosive aluminum. Its turbine is made of hardened cast iron with heat treatment and its mechanical seals are resistant to abrasion. In addition, it has a deposit of 3,9 L and a flow of 60000L/hr.
Characteristics of the AY-80 H KTH motor pump
Technical sheet | |
Motor | HONDA GX-160 |
Bomb | ALUM KTH-80 |
Manguera | 75 mm |
Pressure | 25 m (2,5 BAR) |
Consumer goods | 1,1 l / h |
Sound level | 95 dB |
Caudal | 60000 l / h |
Deposit | 3,9 l |
Weight : | 60 Kg |
start | Manual |
Dimensions | 850 x 600 x 550 mm |
type of pump | Flow / Wastewater | corrosive and abrasive |
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed