Deleks DK wood chipper
La Deleks DK-500 wood chipper, Has 6 horsepower Yamaha engine, which together with its cutting diameter of 6 cm allow it to be able to handle a wide variety of trunks and branches: This model is adapted for grind all types of wood, green or dry: vine branches, olive branches, palm leaves, bamboo... The wood residues obtained can be used to produce humus in the garden. This machine is not for road use, and is not suitable for grinding corn, straw, alfalfa, etc. Other notable features of the engine, apart from power, are its 192 cc displacement and anti-friction operation to avoid direct movement between motor and rotor.
Also has insurance emergency button.
Features
Total width | 550 mm |
Weight : | 100 kg |
Total height | 1050 mm |
Total length | 1720 mm |
Slats: Weight | 300 g |
Transfer | v-belts |
Efficiency | 3 m3 / h |
Cutting system | Drum with 2 slats + 1 counter-slat |
Chip measurement | 5 - 15 mm |
Number of transmission lines | 2 |
measure of the choreas | 13 x 860 |
Security System | Emergency button |
Slats: measure | 150 x 55 mm |
Exit measurements | 85 x 100 mm |
Cutting diameter | 60 mm |
Motor | YAMAHA MX200 192cc 6 Hp |
start | With cable |
Wheels: measurements | 13 500 x-6 |
Inlet width | 150 x 120 mm |
Rudder | √ |
ejection height | 1050 mm |
Oil consume | 0,8 l / h |
packing dimension | 88 x 58 x 87 cm |
Included with the machine:
- spare blades
- Spare counter blade
- 2 spare drive belts
- Anti noise helmet
- CE protective glasses
- Instructions for use and maintenance of the machine
- Instructions for use and maintenance of the YAMAHA engine
- orange spray paint
- Complete set of replacement stickers
- key for maintenance
- Invoice or fiscal receipt
CE conformity
User's manual
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed