Deleks DK-500 Briggs&Stratton wood chipper
La Deleks DK-500 wood chipper, has a large maximum cutting diameter of 6,5 cm and a powerful 208cc Briggs & Stratton engine, which provides a nominal power of 6 and a half horsepower. It also has a cutting system with a 2-blade rotor + a counter-blade. This model is adapted to grind all types of wood, green or dry: vine shoots, olive branches, palm leaves, bamboo... Maximum 6cm. The wood waste obtained can be used to produce humus in the garden. It also has insurance emergency button.
Features
Total width | 550 mm |
Weight : | 100 kg |
Total height | 1050 mm |
Total length | 1720 mm |
Slats: Weight | 300 g |
Transfer | v-belts |
Efficiency | 3 m3 / h |
Cutting system | Drum with 2 slats + 1 counter-slat |
Chip measurement | 5 - 150 mm |
Number of transmission lines | 2 |
measure of the choreas | 13 x 860 |
Security System | Emergency button |
Slats: measure | 150 x 55 mm |
Exit measurements | 85 x 100 mm |
Cutting diameter | 60 mm |
Motor | Briggs&Stratton XR950 – 208cc – 6.5hp |
start | With cable |
Wheels: measurements | 13 500 x-6 |
Inlet width | 150 x 120 mm |
Rudder | √ |
ejection height | 1050 mm |
Oil consume | 0,8 l / h |
packing dimension | 88 x 58 x 87 cm |
Features and Benefits:
- Anti-friction system to avoid direct movement between the motor and the rotor. This facilitates starting and in the event of a locked rotor, prevents the crankshaft from breaking.
- Air-cooled, 4-stroke engine.
- All dimensions are in the photos.
- Ergonomic conception.
- Robust and stable structure with low center of gravity.
- CE safety protections.
Included with the machine:
- spare blades
- Spare counter blade
- 2 spare drive belts
- Anti noise helmet
- CE protective glasses
- Instructions for use and maintenance of the machine
- Instructions for use and maintenance of the Briggs & Stratton engine
- orange spray paint
- Complete set of replacement stickers
- key for maintenance
- CE conformity
- User's manual
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed