Cutting saw MG K 370 AA CNC

Cutting saw MG K 370 AA CNC

The MG K 370 AA CNC cutting saw is a band saw designed to cut tubes, sections and profiles of all types of ferrous materials and light alloys. With automatic bar feeding and automatic or manual cutting execution. A technical sheet with the main technical characteristics of this model is attached below.

• Hydraulic oil and bimetal tape included.
• Solid and robust construction with oversized frame.
• Arc movement by hydraulic unit with skip-stop valve with advance regulator on panel
• Advance feeder with hydraulic unit and ball screw with built-in advance regulator.
• Belt guide with bearings and hard metal plates.
• Hydraulic clamping of the jaws.
• 2 Cutting speeds 40-80 mt / m. .
• Automatic elevation of the arc after the cut with adjustable limit switch.
• Working height 820 mm.
• Emergency stop.
• CE safety standards.
• Dimensions of 3150x27x0,9 mm tape
• 1.5 / 1.9 HP motor
• Cutting speeds 40 - 80 mt / min
• Working height 820 mm
• 0,16 HP coolant pump
• Acoustics 70 dB
• Feeder towing capacity 1000 Kg
• Screw feeder + servo drive 700 mm
• Round cutting capacity 90º 260 mm
• Rectangular cutting capacity 90º 370X200 mm
• Square cutting capacity 90º 220X220 mm
• Round cutting capacity 45º right 250 mm
• Rectangular cutting capacity 45º right 250 × 200 mm
• Square cutting capacity 45º right 200 × 200 mm
• Round cutting capacity 60º right 150 mm
• Rectangular cutting capacity 60º right 150 x130 mm Square cutting capacity 60º right 130 × 130 mm

Data sheet MG K 370 AA CNC cut-off saw