Reinforced blade for Deleks PRI-200-H tractor
The heavy model of reinforced blade for tractor Deleks PRI-200-H it is a shovel conceived in reinforced steel in order to be able to load and transport all kinds of materials, such as earth, sand or even snow. It can also be used for dig and level a ground. This model is equipped with a hydraulic balancing of the shovel Suitable for tractors 60 to 90cv of power, and for the brands Ford, Iseki, Kubota, New Holland, McCormick, Goldoni, Yanmar, Fiat, Case, Deutz-Fahr, John Deere, Lamborghini, etc.
FEATURES AND ADVANTAGES
- Heavy shovel with a load capacity of 700kg.
- Thanks to the hydraulic cylinder, the shovel can tip over and remain inclined in all positions, which allows it to be used as a shovel or as a leveling blade.
- 10mm thick stainless steel blade with cutting edge, which allows good penetration and a long useful life.
- DELEKS® innovates with a new distribution of weights: The blade is raised in the middle (instead of the rear), not requiring a great elevation to allow the material to fall, which reduces the stress on the cylinder hydraulic. This simplifies the work and increases the longevity of the racket.
- The arms do not exceed the width of the shovel, which allows better productivity and avoids proximity to any obstacles.
- There is a safety hinge pin to prevent the possible inadvertent fall of materials.
- Possibility of increasing the load volume of the shovel from 30 to 50% thanks to the rear door and the upper grill (optional purchase).
FEATURES | METRIC UNIT |
---|---|
Total width | 2020.0 mm |
Weight : | 263.0 kg |
Total height | 935.0 mm |
tractor power | 60 – 90 hp |
hitch 3 points | Cat. 1-2 (ø 19.0-22.0mm / 25.0-28.0mm) |
blade width | 2000.0 mm |
Loading capacity | 700.0 Kg |
Cargo volume | 0.62 m3 |
Pointed sheet thickness | 10.0 mm |
Blade sheet thickness | 6.0 mm |
blade height | 520.0 mm |
Depth | 800.0 mm |
overall depth | 1000.0 mm |
Sheet thickness. hitch 3 points | 13.0 mm |
Distance between bottom points | 660.0 - 935.0 mm |
Hydraulic tubes (2) | 1500.0 mm /1.2″ AGRI, WP-400 bar |
Hydraulic piston ø | 80.0/30.0 mm |
Inclination | Hydraulics |
Inclination angle | 80° |
Oil pressure min./max. | 120 - 150 bar |
optimal oil flow | 18 - 22 l / min |
packing dimension | 2030.0 * 1100.0 * 1070.0 mm |
Reviews
Not yet reviewed