Werku WK501110 airless electrical equipment
This Werku electrical equipment model WK501110 it works without air therefore it is compatible with varnishes, lacquers, enamels, primers, polyurethane paints, acrylic paints, plastic paints, acrylic rubber paints, latex paints, tempera, roof coatings and anticorrosive paints. His body is ABS y aluminum so it is quite resistant. His non-slip ergonomic grip and its ease when transporting it makes it very comfortable, In addition, it has a fluid regulator and another pressure with digital display. This equipment is recommended for work on surfaces up to 1500m2.
In addition to these features, the product includes:
- a lubricant
- a manometer
- A WK500600 airless paint gun
- A 15 meter airless hose
- A 500 mm extension
- A removable drip tank
- two fixed wrenches
- An instruction manual
Features of electrical equipment WK501110
recommended compressor | 2.2HP / 1600W |
Work pressure | 120 – 180 BAR |
Maximum pressure | 225 BAR |
inlet thread | N.P.S. 1/4″ |
working flow | 3 BPM |
pitch diameter | ≥0.023″ |
Minimum temperature | 5 ° C |
Maximum temperature | 40 ° C |
Certification | CE |
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed