Deleks LINCE-120 hammer brushcutter
La Brushcutter DELEKS LINCE-120 It has a design designed to be able to be attached to micro-tractors, since it needs just 16 horsepower to work and 40 horsepower at most. Once docked, thanks to its lightweight 160kg designAllows move it comfortably and quickly for almost any tractor. Despite being so light, it does not have as much risk of breaking as it has a structure made of swedish steel ssab. Its rear roller and adjustable skids allow the cutting height to be regulated up to 4.5 cm.
Features
Working width | 1200 mm |
Total width | 1320 mm |
cutting height min/max | 120 - 45 mm |
Weight : | 160 kg |
Total height | 750 mm |
tractor power | 16 – 40 horses |
hitch 3 points | Cat. 1 (diameter 19-22 mm) |
Gearbox position | 555 mm from left side / 765 mm from right side |
hood height | 370 mm |
Distance between bottom points | 470 - 710 mm |
number of hammers | 20 |
Cutting diameter | 20 - 30 mm |
Total length | 730 mm |
Space between ground and transmission box | 472 mm |
Sheet thickness | 3 mm |
Sheet thickness on the sides | 5 mm |
Type: transmission | V-belts |
Transmission: PTO | Lombarda ingranaggi Srl (guarantee 3 years) |
Transmission Direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission - Rotor Speed | 3150 rpm |
Transmission: gearbox oil | Yes / SAE 120 – ISO 72825 |
Transmission - Upper Pulley Diameter | 206 mm |
Drive - Lower Pulley Diameter | 106 mm |
Transmission: number of belts | 3 |
Transmission - Belt Dimensions | AX39 |
rotor: diameter | 102 mm |
Rotor bearing type and dimension | SKF UCF-207 |
rotor: balancing | Electronic |
Rotor: blade thickness | 8 mm |
hammers: weight | 330 g |
Hammers: hole diameter | 12 mm |
Hammers - Base Width | 80 mm |
hammers: diagonal | 75 mm |
Roll: diameter | FL205 |
Roll: type of bearings and dimension | FL205 |
gimbals | CE4X800 |
Bonnet length | 665 mm |
Horizontal displacement | - |
packing dimension | 135 x 85 x 70 cm |
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed