Deleks LEO-140 arm brushcutter with internal transmission box
La Brushcutter arm Deleks LEO-140 has a working width of 1392 mm, which will be used mainly in meadows, gardens and vineyards, where it finds its best performance. It can be used to cut bushes as it tilts around 90 and 60º below.
The machine, through universal 3 point hitch, is capable of coupling to low-power tractors, requiring it only 40 hp to run correctly.
Plus, it comes with a CE gimbal included.
Features
Working width | 1392 mm |
Total width | 1520 mm |
cutting height min/max | 10 - 45 m |
Weight : | 452 kg |
Total height | 850 mm |
tractor power | 40 – 70hp |
hitch 3 points | Cat. 1-2 (ø 19 – 22mm / 25 – 28mm) |
Gearbox position | Internal |
hood height | 390 mm |
Distance between bottom points | 730 - 960 mm |
number of hammers | 20 |
Max. cutting diameter | 40-50 mm |
Total length | 1550mm (closed) |
Space between ground and transmission box | 490 mm |
Sheet thickness | 4 mm |
Sheet thickness on the sides | 6 mm |
Skid thickness | 6 mm |
Type of transmission | V-belts |
Transmission: Gearbox | GB Bologna (Italy) (3 year warranty) |
Transmission: PTO | 540 rpm |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission - Rotor Speed | 2300 rpm |
Transmission: gearbox oil | Yes / SAE 120 – ISO 72925 |
Transmission - Upper Pulley Diameter | 170 mm |
Drive - Lower Pulley Diameter | 120 mm |
Transmission: number of choreas | 4 |
Transmission: dimensions of the belts | 17 x 1026 |
rotor: diameter | 108 mm |
Rotor: type of bearings and dimension | SKF6207 |
rotor: balancing | Electronic |
Rotor: blade thickness | 8 mm |
hammers: weight | 820 g |
Hammers: hole ø | 15 mm |
Hammers - Base Width | 82 mm |
Hammers: head width | 45 mm |
hammers: diagonal | 95 mm |
Roll: diameter | 140 mm |
Roll: sheet thickness | 5 mm |
Roll: type of bearings and dimension | UC205 |
ø Hydraulic cylinder A | 70 - 30 mm |
ø Hydraulic cylinder B | 65 - 25 mm |
Oil pressure min./max. | 120 - 150 bar |
optimal oil flow | 18 - 22 l/m |
hydraulic tubes | WB 400 Bar, 1/2″ Agri Standard |
gimbals | CE 5×1800mm |
Bonnet length | 630 mm |
packing dimension | 158 x 80 x 760 mm |
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Accessories
Reviews
Not yet reviewed