Inox 304 flowered wine tank with pneumatic closure
The 304 stainless steel flowered tanks are wine tanks always filled with pneumatic closure. These tanks are ideal for the fermentation, production and preservation of wines as they solve the problem of oxidation thanks to their pneumatically closed floating lid that prevents the existence of oxygen inside the tank. The tank is equipped with a stainless steel threaded fitting which makes it possible to screw in a tap made of brass, stainless steel or even plastic for food.
Technical characteristics:
- Always full
- With pneumatic closure
Features:
- Walls: 0,8mm
- Depth: 1mm
Serial includes:
- 3/4 ″ chrome-plated brass tap
- 3/4 ″ welded fitting
- external finish to rosettes
- molded and welded bottom
- stainless steel air float
- air chamber
- recovery rope
- aeration valve
- stainless steel pump with analog pressure gauge.
How to use the air float correctly
The steps to use the air float are quite simple and it is enough to follow the following recommendations:
The first step is to fill the tank always full of wine. Next, we will support the stainless steel float on the surface of the wine and unscrew the existing valve in the pump to allow inflation. We will inflate the air chamber included with the tank to approximately 0,7 atm.
We have to pay attention that the chamber is inflated enough to adhere to the internal surface of our tank and to be able to close the valve of the pump. We recommend checking the air pressure in the chamber at least once every two weeks to ensure that the chamber does not lose pressure.
If there is a case of pressure loss in the air chamber, we must check the following:
-There are no holes in the camera.
-Check that the connection between the plastic tube and the air chamber does not leak air.
-Check the pressure gauge in case it is damaged.
-Check that the pump valve is not blocked
Difference between oil seal and pneumatic seal: The pneumatic closure consists of a lid with an air valve that seals the space between the lid and the tank walls. To lower the lid to the level of the wine, the air valve must be deflated. Later, to reseal the wine, the air valve must be inflated again. The difference between the pneumatic seal and the oil seal is that it does not need a pump or valve to lower the tank cap. The gap between the lid and the tank walls is filled with oil and in this way the lid will always lower to the level of the wine stored in the tank. The disadvantage is that a small part of the deposited wine is lost since when it drops to its minimum, the oil mixes with the wine. This type of deposit is highly recommended for continued use. |
Models:
REF | Ø (mm) | Height (mm) | Capacity (l) | Tap (") |
DSLL 100 FLOR | 470 | 800 | 100 | 1/2 |
DSLL 230 FLOWER | 620 | 820 | 230 | 1 |
DSLL 330 FLOWER | 620 | 1.160 | 330 | 1 |
DSLL 420 FLOWER | 750 | 1.020 | 420 | 1 |
DSLL 530 FLOWER | 750 | 1.270 | 530 | 1 |
DSLL 800 FLOWER | 940 | 1520 | 800 | 1 |
DSLL 1000 FLOWER | 940 | 1520 | 1000 | 1 |
Gold series wine tanks
These deposits for wines They are suitable for most wine producers regardless of their size, as they have an excellent quality / price ratio, for this reason it is the one we recommend to most of our customers. Made of AISI 316 stainless steel and certifying a minimum wall thickness of 0 mm. These are known as the SUPERECO PLUS or economic series and the 7mm grain and 0,8mm bottom in both. Its estimated life under favorable conditions is long-lasting. |
Silver series wine tanks
These wine tanks They are ideal for most wine producers regardless of their size, as they have an excellent quality / price ratio, for this reason it is the one we recommend to most of our customers. Made of AISI 304 stainless steel and certifying a wall thickness is 0,8 mm and from the bottom is 1 mm. These are known as the ECO or Economy series. Its estimated life under favorable conditions is very long. |
Bronze series wine tanks
These wine tanks They are suitable for most wine producers regardless of their size, as they have an excellent quality / price ratio, for this reason it is the one we recommend to most of our customers. Made of AISI 304 stainless steel and certifying a wall thickness of 0,6 mm and a bottom of 0,7 mm. These are known as the SuperECO or Economy series. Its estimated life under favorable conditions is long. |
Reviews
Not yet reviewed