- Inverter technology with PFC (Power Factor Corrector) for a very stable cutting arc and energy savings.
- It can be used with a power cable extension up to 25 Mt. (25 mm2)
- With torch, two-cylinder compressor, cable and ground clamp included.
- Pilot arc, adjustable current from 5 to 40 A.
- Cuts all types of metals and their alloys.
- It can work with and without a built-in Compressor and it does so automatically, it can be connected to an external compressor or it can work with its own internal compressor autonomously.
- Torch included with 60A Euro Connector.
- Service factor (Start) 40A at 60%.
- Connectable to motor current generators.
- Reduced dimensions and weight.
- Very stable plasma arc.
- Torch automatic cooling.
- Clean cut 15 mm. Separation 18 mm.
Technical details
Regulation range | 10 - 40A |
Intensity MAX. | 40A@35% |
Steel cutting capacity | 15 mm |
INOX cutting capacity | 12 mm |
aluminum cutting capacity | 15 mm |
Air pressure | 4,5 bar |
Connection | 220-240V 1Ph |
No-load voltage | 240V |
Weight : | 23Kg |
Dimensions | 440x270x350mm |
Compressor | Incorporated |
Airflow | 150l / min |
Reviews
Not yet reviewed