IMPORTANTThe drive unit is always required for mounting the cutter bar |
Available models:
- Dual laser cutter bar with double movement 1,30m
- Dual laser cutter bar with double movement 1,70m
- Dual laser cutter bar with double movement 2,10m
Elasto Laser Cutter Bar
The “Dual Laser Elasto” are cutting bars with double reciprocating movement. The blade and comb move in opposite directions and are equipped with “Laser® teeth” and self-adjusting blade grippers. They are available in widths of 1'30m., 1'70 m. y 2'10 m.
The new “Dual Laser Elasto” cutter bars add superior structural characteristics and superior cut quality of the “Laser®” bars with the advantage of a great ABSOLUTE OPERATIONAL COMFORT.
The level of vibrations is extremely low: the blade and the comb move against each other, canceling each other.
The drastic reduction of vibrations minimizes operator fatigue and premature deterioration of wear parts, providing great savings on spare parts and repairs.
New center hole blades reduce stress and improve cleaning.
Self-adjusting blade clamps maintain a constant force (throughout the life of the bar) between the blade and the comb, without any manual operation by the operator. The new spring steel blade grippers with “deflectors” provide an additional improvement for the discharge of cut grass.
For mounting the “Dual Laser Elasto” cutterbar, the Duplex Torx transmission in oil bath is always required.
Efficiency in each type of terrain and its durability are guaranteed by all the improvements already introduced in the “Laser®” cutter bars:
1. Cylindrical rivets for fixing the blade to the support, to facilitate its replacement in case of damage.
2. Tooth molded in tunnel that allows that, the new system of fixation of the blades with cylindrical rivets, improves the cut and the duration when avoiding the wear caused by abrasion.
3. Knives with heel to improve guidance.
4. Improved attachment of the driver with the section of the blades.
5. Blade plate in high resistance special steel to optimize its efficiency.
6. Blade skidder with reinforced steel bridge to optimize efficiency and durability.
7. Professional skates that allow the cutting height to be adjusted more precisely.
TABLE OF COMPATIBILITY WITH THE MODELS:
MACHINE MODEL | 1,30 m DUAL LASER | 1,70 m DUAL LASER | 2,10 m DUAL LASER |
615L MAX | |||
620 MAX | X | X | X |
630 MAX | X | X | X |
615 Powersafe | |||
618 PowerSafe | |||
630 PowerSafe | X | X | X |
630WS PowerSafe | X | X | X |
630WS PowerSafe EasyDrive | X | X | X |
635 HY EASYGRIP PowerSafe / EASYRIDER PowerSafe | X | X | X |
660 HY WS EASYGRIP PowerSafe / EASYRIDER PowerSafe | X | X | X |
Reviews
Not yet reviewed