Deleks DK wood chipper
La Deleks DK-800 wood chipper, has the 190cc LIFAN 420F engine, which gives you a power of 15 horsepower. In addition, it has a cutting system with a 2-blade rotor + a counter-blade. This model is adapted for grind all types of wood, green or dry: vine branches, olive branches, palm leaves, bamboo... The wood residues obtained can be used to produce humus in the garden. When it comes to ejecting the splinters, it has a discharge pipe made of a tubular piece 160 cm tall, which is fully adjustable with 2 simple levers. Lastly, it has a safe emergency button
Features
Total width | 760 mm |
Weight : | 200 kg |
Total height | 1630 mm |
Total length | 2600 mm |
Slats: Weight | 600 g |
Transfer | v-belts |
Efficiency | 6-7 m3 / h |
Cutting system | Drum with 2 slats + 1 counter-slat |
Chip measurement | 5 - 15 mm |
Number of transmission lines | 2 |
measure of the choreas | 17 x 1041 |
Security System | Emergency button |
Slats: measure | 300 x 55 mm |
Exit measurements | Ø 130.0mm / 180° |
Cutting diameter | 90 - 100 mm |
Motor | Lifan 190F 420cc 15 Hp |
start | Electric and Corded |
Wheels: measurements | 16 x 410 mm |
Inlet width | 150 x 120 mm |
Rudder | √ |
ejection height | 1600 mm |
Oil consume | 1 l / h |
packing dimension | 90 x 76 x 100 cm |
Included with the machine:
- spare blades
- Spare counter blade
- 2 spare drive belts
- Anti noise helmet
- CE protective glasses
- Instructions for use and maintenance of the machine
- Instructions for use and maintenance of the LIFAN engine
- orange spray paint
- Complete set of replacement stickers
- key for maintenance
- Invoice or fiscal receipt
- CE conformity
- User's manual
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed