Cutting saw MG HU 340 500 AA CNC
The MG HU 340 500 AA CNC cutting saw is automatic and designed for cutting iron, steel and metal alloys with a bar feeder for automatic cutting. A machine of great performance and reliability. Below is a file with the main technical characteristics of this machine for your consultation.
- Bar feeder. Bar feeder on iron structure with 820 mm multiple advance travel for lengths greater than 820 mm.
- Cutting cooling. Micro-spraying saw cooling system with minimal oil consumption and zero waste generation.
- Security elements. Emergency stop controlled by safety module. Limit switch with interlocking for detection of open saw guard. Ribbon break detection and lack of tension. All dangerous areas of the feeder are protected by fixed protection devices.
- Cut list programming. Cut list programming via OMRON 5,6 ″ touch screen. Management of 10 programs of 30 lines each.
- Cut grades. Digital display of cutting degrees with quick positioning at 0-15-30-45 and 60º.
- Cut control. Regulation of the cutting speed by means of an electronic speed variator between 26-86 mts / min. Hydraulic arch lowering system with regulation of advance and cutting force from the control panel. Material height detection for changing fast approach lowering speed and cutting lowering speed.
- Dimensions of 4380x34x1,1 mm tape
- HP 4 Engine
- Cutting speeds 26 - 86 mt / min
- Working height 800 mm
- 0,12 HP coolant pump
- Acoustics 70 dB
- Feeder towing capacity 1000 Kg
- Screw feeder + servo drive 820 mm
- Round cutting capacity 90º 340 mm
- Rectangular cutting capacity 90º 500X340 mm
- Square cutting capacity 90º 340X340 mm
- Round cutting capacity 45º right 340 mm
- Rectangular cutting capacity 45º right 360 × 200 mm
- Square cutting capacity 45º right 315 × 315 mm
- Round cut capacity 60º right
- Rectangular cutting capacity 60º right
- Square cutting capacity 60º right
PACKAGING AND DIMENSIONS:
- 2400x2500x1300mm (1550kg)
- Standard packing
Reviews
Not yet reviewed