Juno Dynapok Epoxin SD Epoxy Anti-Corrosion Coating
Anticorrosive coating based on solvent-free epoxy resins.
- 4 L.
- Colors: White (7.952)
Preparation
STEEL. Abrasive blasting up to grade Sa 2 ½-3 according to ISO 8501-1, leaving a roughness of 50 microns minimum. Peeling paint coatings, mill scale, rust and foreign matter will be removed. Any remaining trace of contamination should only show up as small circular spots or stripes. CONCRETE SURFACES. Wait until fully set (min 1 month). The surface must be completely dry. The humidity of the pavement must not exceed 4%, measured at a depth of 2 cm. The surface must be firm and clean of dust, grout or grease and poorly adhered parts. Minimum tensile strength 15 kg / cm². Remove grease and rubber stains with solvents or detergents, then rinse the detergent with water. Use shot blasting and milling if they do not disappear. Grout and curing agents should be removed by shot blasting and milling, subsequently vacuuming the resulting dust, to obtain a rough surface free of foreign materials. The surface to be painted must be rough enough to ensure adhesion. It is convenient to carry out a preliminary test in a representative area (1m²) to work with greater safety.
Use
INTERIOR
It is used in the food industry for the interior protection of tanks and silos, both made of concrete and new steel, that will contain drinking water, due to its great chemical resistance, hardness and also free from all migratory toxicity.
Application
Brush, spatula to supply viscosity. AIRLESS GUN
Downloads
Reviews
Not yet reviewed