Indoor powder coating for absorbent or primed substrates: plaster, plasterboard, plaster, cement, concrete, wood, rough painted surfaces, primed and protected metal surfaces, etc.
Add 1 kg of powder to ½ liter of water and stir until obtaining a homogeneous paste, ready to be used for approximately 3 hours at 20ºC. Apply with a smooth trowel or stainless steel spatula.
Especially indicated for the prevention of problems caused by condensation in building areas with a high degree of humidity, prone to the formation of thermal bridges: parts without ventilation, storage rooms, garages, areas with a "cold wall" effect, slab fronts, lintels, blind boxes, windowsills and pillars, etc.
On clean, healthy substrates, free of grease, wax and materials that reduce adhesion capacity. Eliminate loose and badly adhered parts. Prime if necessary.
PLASTE ANTICONDENSATION Safety Data Sheet
Technical Data Sheet PLASTE ANTICONDENSACION
Not yet reviewed