Dynapok SD Epoxy Coating
Polyamine adduct catalyzed low viscosity modified epoxy coating.
- 4 L.
- Colorless Bright
Preparation
STEEL. Abrasive blasting up to grade Sa 2 ½-3 according to ISO 8501-1, leaving a roughness of 50 microns minimum. Peeling paint coatings, mill scale, rust, and foreign matter will be removed. Any trace of remaining contamination should only show up as small circular spots or stripes. CONCRETE SURFACES. Wait until fully set (min 1 month). The surface must be completely dry. Pavement moisture should not exceed 4%, measured at a depth of 2 cm. The surface must be firm and clean of dust, grout or grease and poorly adhered parts. Minimum tensile strength 15 kg / cm². Remove grease and rubber stains with solvents or detergents, then rinse the detergent with water. Use shot blasting and milling if they do not disappear. Grout and curing agents should be removed by shot blasting and milling, subsequently vacuuming the resulting dust, to obtain a rough surface free of foreign materials. The surface to be painted must have the
Use
INTERIOR
As a primer on concrete floors or cementitious mortars. Prevents premature deterioration of concrete and dust from it. Seals, waterproofs and protects concrete pavements against spills of products of various kinds. Solvent free. Excellent adhesion and chemical resistance.
Application
Brush, spatula to supply viscosity. AIRLESS GUN
Reviews
Not yet reviewed