Hammer brushcutter for small tractor Deleks APE-100
La Deleks APE-100 hammer brushcutter It has a working width of 100 cm. In addition, this machine is specially designed for small-power tractors of 12 to 30CV. Its structure is made of swedish steel ssab and its weight is light. They have an adjustable roll that allows you to regulate your cutting height. It has Premium 3-point hitch. Its forged steel hammers allow cutting vegetation up to 2cm thick.
This brushcutter allows you to adjust the tension of the belts externally and has hammer supports on the HARDOX.
Working width | 1000 mm |
Total width | 115 mm |
Min/Max cutting height | 20 - 35 mm |
Total height | 623 mm |
tractor power | 12 - 30 HP |
hitch 3 points | Cat. 1 (Ø 19-22mm) |
hood height | 317 mm |
Distance between bottom points | 380 - 580 mm |
number of hammers | 24 |
maximum cutting diameter | 10 - 20 mm |
Total length | 640 mm |
Space between ground and transmission box | 385 mm |
Sheet thickness | 3 mm |
thickness on the sides | 3 mm |
Type of transmission | V-belts |
Transmission: Gearbox | Lombarda Ingranaggi Srl |
Transmission: PTO | RPM 540 |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | ✓ |
Transmission - Rotor Speed | 3000 rpm |
Transmission: gearbox oil | Yes / SAE 120 – ISO 72925 |
Transmission - Upper Pulley Diameter | 185 mm |
Drive - Lower Pulley Diameter | 96 mm |
Transmission: number of belts | 2 |
Transmission - Belt Dimensions | AX35 (889LI) |
Roll: diameter | 76 mm |
Roll: sheet thickness | 6,3 mm |
Roll: type of bearings and dimension | UCFL204 |
gimbals | CE 2×800mm |
Bonnet length | 525 mm |
Weight : | 105 Kg |
Videos of the Deleks APE-100 Hammer Trimmer
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed