Hedge trimmer for tractor Deleks FALCO-180-HS

Hedge trimmer for tractor Deleks FALCO-180-HS

Note: For transport reasons, the main boom is fixed at a low point, to limit the height. The final assembly in the position of use will have to be carried out by the client.

El Deleks FALCO-160-HS Hedge Trimmer with cutterbar for pruning grass and hedges with a maximum diameter of 1-2 cm. It works on both sides and can be used on the front.

Barista

• Reversible chassis with 3 hydraulic movements.
• Remote control with 4 levers and flexible tubes.
• Independent hydraulic system (Made in Italy).
• Oil tank 20 L (given already at level).
• Cutting bar with 24 teeth of 180cm of effective work.
• 3-point hitch Cat. 1-2 standard.

Advantages

• Forward movement of the cutter bar next to the operator.
• 3,5 m arm that allows you to overcome obstacles.
• The blades move quickly and allow a precise cut of the hedge.
• Double hydraulic pump that allows the arm to move and cut at the same time.
• Symmetrical structure with double hitch to 3 points cat. 1-2 that allows every angle of cut on both sides of the tractor and use at the rear and front, all without making modifications to the machine.
• Robust but light chassis for optimal maneuverability also with medium-low power tractors.
• Standard cutting blades, which can be easily purchased from the market or from us.

Details

• Cutter bar rotation angle 270°
• Long hydraulic pipes to the distributor: 2500 mm.
• Length of hydraulic pipes to the PTO hydraulic pump: 900 mm.
• Tractor specific: 20-60cv, minimum weight 800kg.
• Measurements second graph:

• • A1: 5000mm
  • A2: 3200mm
  • B1: 3700mm
  • B2: 5700mm
  • C1: 2800mm
  • C2: 1000mm

Documentation delivered with the machine:

• Invoice or fiscal receipt
• CE conformity
• User's manual