Concrete Pump Booster-15 and Booster-15 R

Concrete Pump Booster-15 and Booster-15 R

Piston pump equipped with a diesel engine, cooled by water, highly soundproofed and conforming to the recent Standards for pollution control.

It is supplied with a standard rudder for towing on site or with a rudder and approved braking system, for public towing.

With two-cylinder piston pump with hydraulic command, and exclusive “SOFT SPRITZ” system that guarantees the correct pumping of the material, even when pumping at a low flow rate.

With automatic valve "S", for the exit and return of the material.

"ANTI-SHOCK" control panel with electromechanical drive.

Conical hopper, with bidirectional mixer and folding opening, to facilitate cleaning and maintenance.

Circuit for oversized refrigeration "COOL-FAST" for use in extreme conditions.

It is capable of pumping up to an aggregate of 25 mm, as long as the logical and correct granulometric curve of the concrete is maintained.

Standard equipment of the Concrete pump Booster-15 B and Booster-15 B / R

• Hopper with agitator.
• Grid with electrovibrator (12v).
• Hydraulic power unit with reversing gear.
• Pumping group with "S" valve for the automatic recovery of materials.
• Output manifold 4 "(Ø100 mm) Victaulic.
• Control panel with electromechanical commands.
• Remote control with ON-OFF type hose with flow regulation.
• Kit for the replacement of the pumping pistons.
• Rudder for the "non-towable" version on public roads.
• Helm for towing by public road with parking brake (towable version by public road).
• Lubrication pump.
• Tool box and accessories.
• Instruction manual, breakdown book and CE Certificate

Pumping kit

• 7 4 steel pipe sections "of 3 m length each.
• 1 rubber hose section of 100 mm inner Ø of 3 m length.
• 1 steel elbow to 90º of 4 ", for the introduction of the sponge ball.
• 15 4 joints "for couplings.
• 2 steel elbows to 90º of 4 ".
• 2 steel elbows to 45º of 4 ".
• 12 4 couplings ".
• 2 150 mm Ø sponge balls for pipe cleaning.
• 1 ball-collecting basket.

Gunned / projection kit

• 1 metal grid with mesh of 15 mm Ø.
• 1 projector for rubber hose of 50 mm Ø inside.
• 30 m (10 + 10 + 10) rubber hose 50 mm inner Ø.
• 1 reducing elbow from 4 "to 2".
• 1 clamp for rubber hose of 50 mm Ø inside.
• 1 4 coupling "with two joints.
• 3 2 couplings "with six joints.
• 1 board with attack system "Camme".
• 2 sponge balls of Ø 60 mm for hose cleaning.