IMPORTANTThe drive unit is always required for mounting the cutter bar |
Available models:
- Double movement Duplex cutter bar 1,20m
- Double movement Duplex cutter bar 1,50m
- Double movement Duplex cutter bar 1,80m
Duplex cutter bar
The Duplex cutter bar is double reciprocating: blades and teeth move simultaneously in opposite directions.
The movement of the fingers eliminates the possibility of the mower plugging, allowing a constant working speed without compromising the quality of the cut. The fingers also protect the blades from impact against stones or other foreign bodies. Once worn by use, the fingers can be conveniently replaced without removing the blade from the cutting unit.
The self-adjusting elastic blade clamping by means of 'leaf spring' keep constant the properties of the 'scissor' cut and avoid the manual adjustments typical of other mowing bars. When the blades need to be replaced, the blade clamp is quickly inhibited, making it possible to replace them in a few seconds.
The blades are reinforced with a thickness of 2,5 mm and have heat treatments that increase their hardness and resistance.
Its working speed is higher than that of other bars, even when the product to be mowed is very dense, making it an excellent bar for large farms and any type of product, from delicate grass to weeds.
TABLE OF COMPATIBILITY WITH THE MODELS:
MACHINE MODEL | 1,20 m DUPLEX | 1,50 m DUPLEX | 1,80 m DUPLEX |
615L MAX | |||
620 MAX | X | X | X |
630 MAX | X | X | X |
615 Powersafe | |||
618 PowerSafe | |||
630 PowerSafe | X | X | X |
630WS PowerSafe | X | X | X |
630WS PowerSafe EasyDrive | X | X | X |
635 HY EASYGRIP PowerSafe / EASYRIDER PowerSafe | X | X | X |
660 HY WS EASYGRIP PowerSafe / EASYRIDER PowerSafe | X | X | X |
Reviews
Not yet reviewed