El European Scaffolding DINO 48 es ideal for work on regular facades, Ya que allows high assembly performance, thanks to a simple design and an excellent manageability. It is also, compatible with MEKA 48 multidirectional scaffolding.
The Dacame DINO 48 European Scaffolding is composed mainly of frames and frames, which together with platforms, bars and diagonals, together with the security elements, offer adaptable sets to any façade, always guaranteeing the safety of the operator.
Design Modular scaffolding DINO 48 present a technology of solutions for rehabilitation works, application of coatings, maintenance and general masonry, which presents it as a scaffolding system of great benefits.
Manufactured in accordance with European standards:
- UNE-EN 12810
- UNE-EN 12811
Technical Specifications
Steel tube Ø 48,3 mm quality ST-44
Two coating possibilities:
- Galvanized hot according to UNE-EN 1461 with a minimum thickness of 75 microns
- Painting Epoxy suitable for external use
Modular
Modular | Reference | Quantity |
Spindle Base Diam. 36 (500) | 025010108 | 10 |
Scaffolding frame “Dino 48” 2000 x 700 (GA) | 020620079 | 10 |
STO. Railing “Dino 48” Central (GA) | 020611729 | 3 |
STO. Railing “Dino 48” Lat. 700 (GA) | 020611709 | 2 |
Side Railing “Dino 48” 700 (GA) | 025010769 | 2 |
Bar “Dino 48” 2000 T4 (GA) | 021620209 | - |
Bar “Dino 48” 3000 T4 (GA) | 021620309 | 32 |
Diagonal “Dino 48” T4 F- (GA) | 022630309 | 2 |
STE. Initiation Plat. "Dino 48" 700 (GA) | 025029039 | 1 |
Platforms
Platforms | Reference | Quantity |
Fixed platform (M48 / D48) 3000 C-4 (GA) | 210530300 | 32 |
Fixed platform (M48 / D48) 2000 C-4 (GA) | 210530200 | - |
Platform C / Trampilla M48 / D48 C-4 3000 (MD / AL) | 210600300 | 4 |
Platform ladder (AL) | 240920000 | 4 |
Ladder Support (GA) | 212390010 | 1 |
Skirting
Skirting | Reference | Quantity |
Skirting board M48 / D48 700 (MD) | 210800070 | 8 |
Skirting board M48 / D48 3000 (MD) | 210800300 | 20 |
Skirting board M48 / D48 2000 (MD) | 210800200 | - |
Nomenclature
1. Spindle base | 12. Lateral brace |
2. Scaffolding frame | 13. Extension stringer |
3. Gantry scaffolding frame | 14. Fixed metal platform |
4. Gantry flange spigot | 15. Access platform |
5. Spigot with flange | 16. Platform ladder |
6. Side guard railing | 17. Stair support |
7. Central guardrail supplement | 18. Skirting |
8 Diagonal T4-F | 19. Mooring |
9. T4 bar | 20. Bracket |
10. Lattice beam | 21. Telescopic stabilizer |
11. Upper railing | 22. Visor protection |
See specific parts of the Dacame DINO 48 scaffolding
Assembly sequence + Explanatory Video
1 | Place the spindle bases on the ground, starting at the highest point. Depending on the terrain, it is advisable to use partition plates to distribute the load transmitted to the ground. | 2 | Mount two frames of scaffolding, joined by means of two bars on the outside and a bar on the inside, provide more rigidity through the diagonal. |
3 | Assemble the rest of the frames, bars and diagonals (these will depend on the length and height of the scaffolding). | 4 | Assemble the work platforms as well as the access platform, supporting the access ladder on the ladder support coupled to the supplementary crossbar. |
5 | Mount the second level of frames. The operator must be provided with a safety harness attached to a secure anchor point. | 6 | Complete the second level by mounting: bars to 0,5 and 1 m level of the platforms, diagonals, side rails and skirting boards. Framing scaffolding to the façade, using tie-rods, fixed bridles, studs and hooks, according to the anchor pattern that applies in each case. |
7 | Assemble the side railing inserts at the ends and the central inserts in the intermediate spans. | 8 | Complete the side protection by mounting the upper rails and skirting boards. |
Reviews
Not yet reviewed