Showing all results 19

5,45 - 11,80

  • Set of 2 benchtop vise clamps.
  • Perfectly coupled to clamping jaws.
  • Includes the nuts to tighten the mouths.

6,62 - 9,91

  • Trapezoidal level aircraft wing with die-cast aluminum body with machined bearing surface for greater leveling accuracy.
  • Body with milled surface, in profile shape and with hole for hanging.
  • It has 2 bubble bottles, one horizontal and one vertical.
  • Accuracy: 1mm / m normal position.

6,44 - 14,43

  • Magnetic tubular level with aluminum body with ground surfaces for greater precision and use on both sides.
  • Body with ground surfaces, magnet on the outside of the level and sides with rubber shock protector.
  • It has 3 bubble bottles, one horizontal, one vertical and at 45º.
  • Magnets in the central area.

8,76 - 12,90

  • Magnetic tubular level with aluminum body with ground surfaces for greater precision and use on both sides.
  • Body with ground surfaces, magnet on the outside of the level and sides with rubber shock protector.
  • It has 3 bubble bottles, one horizontal, one vertical and at 45º.
  • Magnets in the central area.

2,67 - 4,84

  • Clamping screw sergeant for tightening in wood and metals in order to fix them and carry out operations of nailing, gluing, drilling, etc.
  • Sergeant composed of:
  • Painted nodular cast iron jaws.
  • Calibrated steel rim and serrated on both sides.

59,90 - 130,59

  • Bench vise suitable for placing on a work table, screwed.
  • It has a rotating base, which allows it to be attached with screws to the work table, being possible to rotate the screw 360 degrees.
  • The screw is made of steel, and is painted over a large part of the surface.
  • The most frequently used surfaces are chrome plated to prevent oxidation.

0,91 - 1,19

  • Replacement plastic jaws for HR replaceable plastic jaw hammer.
  • Adjustment jaws by screwing to the hammer head.

5,87 - 8,06

  • Chisel cutter for hardened body mechanics.
  • Made of Chrome Silicon Molybdenum steel, to guarantee greater hardness and resistance to impacts.
  • Rectangular shaped body for greater robustness.
  • Hitting zone tempered at 40 HRC and working zone tempered by induction at 55 HRC.

8,13 - 8,93

  • Chisel cutter for hardened body mechanics. With ergonomic plastic protector and shock prevention.
  • Chisel cutter made of Chrome Silicon Molybdenum steel, to ensure greater hardness and resistance to impacts.
  • Rectangular shaped body for greater robustness.
  • Hitting zone tempered at 40 HRC and working zone tempered by induction at 55 HRC

9,79 - 13,53

  • Ax with fiberglass handle in ergonomic shape ensuring comfort when working.
  • The forged carbon steel head and hardened work surface achieve high hardness and impact resistance. Polished and resharpenable cutting edge.
  • Fixation of the handle by means of epoxy resin, which makes it impossible to leave the head.
  • The ergonomic handle is bi-material with grooves to prevent slipping and curves to facilitate grip and transmission of effort.

8,19 - 10,08

  • Mason pot with two-component fiberglass handle and conical eye head fixation.
  • The forged carbon steel head and hardened work surface achieve high hardness and impact resistance. This gives it a long life of use.
  • Fixation of the handle by means of a conical eye, significantly increasing safety, as the handle cannot accidentally come out.

3,05 - 3,53

  • Replacement handle for HR ax.
  • Ergonomic, anti-vibration two-component handle.
  • Requires epoxy resin to be attached to the head

2,68

  • Replacement handle for HR ball hammer.
  • Ergonomic, anti-vibration two-component handle.
  • Requires epoxy resin to be attached to the head

8,00 - 8,77

  • Interchangeable nylon jaw hammer with wooden handle.
  • Handle attached to the hammer body by nut. The interchangeable plastic jaws are screwed onto the head.
  • The nylon hammer is used to strike metal or sheet metal parts without marking the surfaces.
  • Valid for DIY in parts where you can not use a steel hammer, to avoid breaks or dents.

7,32 - 9,35

  • Ball hammer with two-component fiberglass handle and head-handle fixation with resin.
  • The forged carbon steel head and hardened flat work surface and hardened ball achieve high hardness and impact resistance. This gives it a long life of use.
  • Fixation of the handle by resin.
  • The handle is made of fiberglass inside, easy to grip, and high transmission capacity of the applied force. In addition, this handle strongly dampens the vibration generated by the blow.

5,00 - 6,06

  • Cabinetmaker's hammer with two-component fiberglass handle and head-handle fixation with resin.
  • The forged carbon steel head and hardened work surface achieve high hardness and impact resistance. This gives it a long life of use.
  • Fixation of the handle by resin.
  • The handle is made of fiberglass, easy to grip, and has a high transmission capacity of the applied force. In addition, this handle strongly dampens the vibration generated by the blow.

6,26 - 7,02

  • Hammer with double curved claw with two-component fiberglass handle and head-handle fixation with resin.
  • The forged carbon steel head and hardened work surface achieve high hardness and impact resistance. This gives it a long life of use.
  • Fixation of the handle by resin.
  • The handle is made of fiberglass, easy to grip, and has a high transmission capacity of the applied force.

26,96 - 33,48

  • Construction baton mace with two-component fiberglass handle and head fixation by conical eye.
  • The forged carbon steel head and hardened work surface achieve high hardness and impact resistance. This gives it a long life of use.
  • Fixation of the handle by means of a conical eye, reinforced by a ring, significantly increasing safety, as the handle cannot be accidentally pulled out.
  • The handle is made of fiberglass, easy to grip, and has a high transmission capacity of the applied force. In addition, this handle strongly dampens the vibration generated by the blow.

65,00

Total range vise